Tatuus IP-22
About
Recent News
  • 23-05-31-mvm1_450
    Pole and Podium for Jack William Miller
     5.31.23| 
    • Team News
  • granfors_2
    Granfors powers to podium on oval debut
     5.30.23| 
    • Team News
  • d'Orlando_IRP_450
    Turn 3 Motorsport Shows Speed at IRP
     5.30.23| 
    • Team News
  • 23-05-30-tjspeed1_450
    Pizzi Leads TJ Speed at Indianapolis Raceway Park
     5.30.23| 
    • Team News
  • 23-05-30-jhdd2_450
    JHDD Adds Podium Result at IRP
     5.30.23| 
    • Team News

Tatuus IP-22 Specifications

side2-a

2022 marked another pivotal year with the introduction of new chassis – the Tatuus IP-22 and USF-22 – which will extend the competition life of each to 2026. Upgrades include a new, wider monocoque with the addition of a Halo-type device as well as new sidepods, underfloor, engine cover, air ducts, damper covers and fuel cell.

Chassis

Full carbon composite and aluminum honeycomb monocoque manufactured by Tatuus Racing meeting current FIA 2020 GEN 1 with Halo-type device safety standards including side impact panels, front and rear impact structures, HANS-compliant INDYCAR head restraint, front and rear wheel tethers, upgraded uprights, and upgraded front bulkhead structure for USA specific oval racing circuits.

Engine

Mazda developed 2-litre MZR-PM18A (275 HP) prepared by Elite Engines, with maximum torque of 190 Ft. Lbs., utilizing a fly by wire throttle system and Cosworth SQ6 engine management system.

Bodywork and Aerodynamics

Unique USF Pro 2000 specific engine cover, carbon composite diffuser, adjustable dual element rear wing and single plane carbon fiber front wing with adjustable flaps and series specific front and rear endplates. All bodywork carbon fiber construction.

Wheels

Motegi Racing forged Technomesh mono-block alloy wheels, 13 X 10 and 13 X 12 sizes (front & rear).

Tires

Dry and wet tires to USF Pro 2000 specification supplied by Cooper Tires.

Brakes

Performance Friction Brakes ZR24 4-piston monobloc caliper with 274.0mm discs on both the front and rear axles.  Driver adjustable brake bias.

Steering Wheel

Cosworth CFW277 with integrated dash and gear change paddles.

Electrical

Cosworth Omega L2 Plus Data Logger linked via CAN to Cosworth SQ6 ECU and GCU. Option to upgrade to an Omega Pro, at added cost.

Gearbox

Sadev SL82 six-speed sequential transmission fitted with optimized USF Pro 2000  gear ratio set controlled by a Magneti Marelli gearshift system.

Suspension

Twin wishbone suspension with pushrod actuation to Dynamic DSSV two-way adjustable dampers and a range of adjustable front and rear anti-roll bars. Springs provided by Hyperco, with six spring rates available, interchangeable for front and rear axles. Upgraded front and rear uprights for USA specific oval racing. Ride-height, camber and toe adjustment on both axles with roll center, anti-squat and anti-dive adjustments on rear axle.

Fuel System

Premier Fuel Systems 50 liter FT3 fuel cell with internal high pressure pump and filters.

Safety System

Fully integrated electronic FIA approved fire extinguisher system.

Engine Control Unit

Cosworth SQ6 including integrated engine and gearshift control systems.

Dimensions

Overall Length:          172 inches/4370 mm

Overall Width:            75 inches/1915 mm

Weight:                        1168 lbs./530 kg. (less driver and fuel)